Skip to content

Our Full Spectrum of Barrier System Panels and Accessories

ADJUSTABLE PANELS

4000 4' Panel Assembly

Our 48" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel, shown above, slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up to the ceiling, then retighten the knobs.

The 48" panels are our work horse panel. They allow you to enclose large areas very quickly. Setup time for this panel is about 2 minutes.

Our 48" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to the bottom side to create a seal to the floor.
The sides of the panel contain closed cell gasket material to form a seal between the panels and the top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.

Grid clips and camlocks are included with the panels.

Opal - P/N 4000 - $580.00

Transparent - P/N 4000T - $580.00

Clear - P/N 4000C - $620.00

All panels are available in Transparent, Opal and Clear

4001 3' Panel Assembly

4001 3' Panel Assembly_1

Our 36" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel, shown above, slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up to the ceiling, then retighten the knobs.

The 36" panels, like the 12" panels, are typically used for odd shaped configurations. It's nice to have a couple on hand but the 48" panels should be used when possible. Setup time for this panel is about 2 minutes.

Our 36" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to the bottom side to create a seal to the floor.
The sides of the panel contain closed cell gasket material to form a seal between the panels and the top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.

Grid clips and camlocks are included.

Opal - P/N 4001 - $550.00

Transparent - P/N 4001T - $550.00

Clear - P/N 4001C - $580.00

All panels are available in Transparent, Opal and Clear dust barrier panels building construction - general contractors and operative builders residential construction

4002 2' Panel Assembly

Our 24" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up to the ceiling, then retighten the knobs. We offer several options on our 24" panels.

Our 24" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to the bottom side to create a seal to the floor.

The sides of the panel contain closed cell gasket material to form a seal between the panels.

The top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.

Grid clips and camlocks are included with the panels.

4002 is our standard 24" panel. dust barrier panels building construction - general contractors and operative builders Hospital Renovation, Safety, Hospital Construction

Opal - P/N 4002 - $430.00

Transparent - P/N 4002T - $430.00

Clear - P/N 4002C - $450.00

Opal - P/N 4002.1 $500.00

Transparent - P/N 4002.1T - $500.00

Clear - P/N 4002.1C - $520.00

All panels are available in Transparent, Opal and Clear

All panels are available in Transparent, Opal and Clear

4002.1 is our standard panel with a port to exhaust HEPA filtered air out of the containment area. This port has an 8" I.D. and a 10" O.D. on both the inside and outside of the panel.

An 8" diameter plug is tethered to the inside of the panel to close the port off when not in use.

Opal - P/N 4002.1 $500.00

Transparent - P/N 4002.1T - $500.00

Clear - P/N 4002.1C - $520.00

All panels are available in Transparent, Opal and Clear

4002.1 is our standard panel with a port to

exhaust HEPA filtered air out of the

containment area. This port has an 8" I.D.

and a 10" O.D. on both the inside and

outside of the panel.

An 8" diameter plug is tethered to the

inside of the panel to close the port off

when not in use.

4002.1 2' Panel Assembly with HEPA Filtered Air Discharge Port

Our 24" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up to the ceiling, then retighten the knobs. We offer several options on our 24" panels.

Our 24" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to the bottom side to create a seal to the floor.

The sides of the panel contain closed cell gasket material to form a seal between the panels.

The top of the panel has a 1/4" thick soft ether foam gasket to conform to the& ceiling.

Grid clips and camlocks are included with the panels.

4002 is our standard 24" panel. dust barrier panels building construction - general contractors and operative builders Hospital Renovation, Safety, Hospital Construction

Opal - P/N 4002 - $430.00

Transparent - P/N 4002T - $430.00

Clear - P/N 4002C - $450.00

Opal - P/N 4002.1 $500.00

Transparent - P/N 4002.1T - $500.00

Clear - P/N 4002.1C - $520.00

All panels are available in Transparent, Opal and Clear

4002.1 is our standard panel with a port to exhaust HEPA filtered air out of the containment area. This port has an 8" I.D. and a 10" O.D. on both the inside and outside of the panel.

An 8" diameter plug is tethered to the inside of the panel to close the port off when not in use.

Opal - P/N 4002.1 $500.00

Transparent - P/N 4002.1T - $500.00

Clear - P/N 4002.1C - $520.00

4002.1 is our standard panel with a port to

exhaust HEPA filtered air out of the

containment area. This port has an 8" I.D.

and a 10" O.D. on both the inside and

outside of the panel.

An 8" diameter plug is tethered to the

inside of the panel to close the port off

when not in use.

4006 12'' Panel Assembly

Our 12" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel, shown above, slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up to the ceiling, then retighten the knobs.

It's nice to have a couple on hand to use as fillers for odd shaped areas.

Our 12" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to the bottom side to create a seal to the floor.
The sides of the panel contain closed cell gasket material to form a seal between the panels and the top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.

Grid clips and camlocks are included with the panels.

Opal - P/N 4006 $285.00

Transparent - P/N 4006T $285.00

Clear - P/N 4006C $295.00

All Panels are available in Transparent, Opal and Clear

​4005 6" Panel Assembly

Our 6" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel, shown above, slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up to the ceiling, then retighten the knobs.

4005 is our 6" panel. $265.00 It's nice to have a couple on hand to use as fillers for odd shaped areas.

Our 6" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to the bottom side to create a seal to the floor.

The sides of the panel contain closed cell gasket material to form a seal between panels and the top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.

Grid clips and camlocks are included with the panels.

Opal - P/N 4000 - $265.00

Transparent - P/N 4000T - $265.00

Clear - P/N 4000C - $275.00

All panels are available in Transparent, Opal and Clear

4003 Door Assembly

The picture above shows the outside face of our door panel. The door can be ordered with a RH or LH swing.

Our typical door panel consists of a 44" door mounted in a 48" frame. We also make a 48" door mounted in a 52" frame; and a 32" door mounted in a 36" frame. The door has a polyethylene continuous hinge which provides smooth quiet operation while forming an air tight seal. The strike side and top of the door have a 1" x 1" angle mounted to them with a gasket adhered to it to form a seal with the frame. The bottom of the door has a gasketed sweep to prevent dust and debris from escaping the enclosure.

The picture above is showing the inside face of our door panel with Opal polycarbonate.
This has become very popular. Our door panel is 48" wide by 7'-8" tall and adjusts to 10'-0". We provide an adjustable hydraulic closer and a self latching, locking handle, keyed outside, thumbturn inside.
1/4" x 2" solid aluminum threshold strip with neoprene gasket material seal to the floor.

Opal - P/N 4003 - $995.00

Transparent - P/N 4003T - $995.00

Clear - P/N 4003C - $1035.00

We also offer a pushbutton lock for an additional $200. This lock can be set to any 4 digit combination and is easily reset from storeroom to classroom function. This particular lockset also allows for a keyed entry.

4004 Hinged Corner Assembly

Hinged Corner Assembly Allows you to make transitions from 90 degrees to about 170 degrees. The simplest way to create angles is to connect the corner to the two mating panels at 90 degrees, then swing one panel to the angle you desire.

Hinged Corner Assembly Product number: 4004

Price: $185.00

4007 Outside Corner Post

Outside Corner Post

Outside Corner Post - P/N 4007 - $150.00

4009 T-Post Assembly

T-Post Assembly

Product Number: 4009

Price: $150.00

​A T-Post allows you to form an intersection with panels.

Dimensions: 7' x 8" Tall by 2" wide ​with an adjustable slider that can reach a height of 10'

PACKAGES

6000 8' x 2' Anteroom Type Enclosure

Anteroom Packages

general contractors and operative builders Ante Rooms, Infection Control, Safety, Hospital Renovation, Construction Containment Systems

6000 8' x 2' Anteroom Type Enclosure

Qty 1 - P/N 4000 - 4' Panel Assembly $580.00

Qty 1 - P/N 4003 - Door Assembly $995.00

Qty 1 - P/N 4002.1 - 2' Panel Assembly with HEPA Discharge Port $500.00

Qty 1 - P/N 4002 - 2' Panel Assembly $430.00

Qty 2 - P/N 4004 – Hinged Corner Assembly $370.00

Qty 12 - P/N 3003 - Closure Strip $96.00

Qty 1 - P/N 4011 - Panel Transport Cart $275.00

Opal - P/N 6000 - $3246.00

Transparent - P/N 6000T - $3,246.00

Clear - P/N 6000C - $3366.00

6005 12' x 2' Anteroom Type Enclosure

Anteroom Packages

general contractors and operative builders Ante Rooms, Infection Control, Safety, Hospital Renovation, Construction Containment Systems

6005 12' x 2' Anteroom Type Enclosure

Qty 2 - P/N 4000 - 4' Panel Assembly $1,160.00

Qty 1 - P/N 4003 - Door Assembly $995.00

Qty 1 - P/N 4002.1 - 2' Panel Assembly with HEPA Discharge Port $500.00

Qty 1 - P/N 4002 - 2' Panel Assembly $430.00

Qt y 2 - P/N 4004 – Hinged Corner Assembly $370.00

Qty 12 - P/N 3003 - Closure Strip $96.00

Qty 1 - P/N 4011 - Panel Transport Cart $275.00

Opal - P/N 6005 - $3,826.00

Transparent - P/N 6005T - $3826.00

Clear - P/N 6005C - $3986.00

6010 4' x 2' Anteroom Type Enclosure

​Anteroom Packages

general contractors and operative builders Ante Rooms, Infection Control, Safety, Hospital Renovation, Construction Containment Systems

6010 4' X 2' Anteroom Type Enclosure building construction 

Qty 1 - P/N 4003 - Door Assembly $995.00

Qty 1 - P/N 4002.1 - 2' Panel Assembly with HEPA Discharge Port $500.00

Qty 1 - P/N 4002 - 2' Panel Assembly $430.00

Qty 2 - P/N 4004 - Hinged Corner Assembly $370.00

Qty 12 - P/N 3003 - Closure Strip $96.00

Qty 1 - P/N 4011 - Panel Transport Cart $275.00

Opal - P/N 6010 - $2666.00

Transparent - P/N 6010T - $2666.00

Clear - P/N 6010C - $2746.00

6015 3' x 2' Anteroom Type Enclosure

​Anteroom Packages

general contractors and operative builders Ante Rooms, Infection Control, Safety, Hospital Renovation, Construction Containment Systems

6015 3' X 2' Anteroom Type Enclosure

Qty 1 - P/N 4010 - 36" Door Assembly $895.00

Qty 1 - P/N 4002.1 - 2' Panel Assembly with HEPA Discharge Port $500.00

Qty 1 - P/N 4002 - 2' Panel Assembly $430.00

Qty 2 - P/N 4004 - Hinged Corner Assembly $370.00

Qty 12 - P/N 3003 - Closure Strip $96.00

Qty 1 - P/N 4011 Panel Transport Cart $275.00

Opal - P/N 6015 - $2,566.00

Transparent - P/N 6015T - $2,566.00

Clear - P/N 6015C - $2,636.00

ACCESSORIES

3001 Grid Clip Assembly $7.45

The Grid Clip Assembly is a very important part of the EDGE Guard Dust Free Barrier System.

Our grid clips have been specially designed to secure the top rail of our Adjustable Panels to suspended type ceiling grid. The low profile top section allows the clip to fit around the edge of the grid without disturbing the ceiling tile (flat or tegular). A plastic pinch block prevents damage to the grid. Our clips work with standard 15/16” grid, fine line grid and extruded aluminum gasketed grid.

Grid Clips slide along the entire length
of the panel top rail to adapt to the grid
layout. No tools are required.
Grid Clips are included with our panel
assemblies or may be purchased
separately @ www.edge-guard.com

3002 Cam Lock Assembly $5.15

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

3003 Closure Strip $8.00

Step 1 – Insert ½” sheet metal backer strips
into the panel’s aluminum side as shown.

Step 2 – Apply double sided polyethylene tape to the face of the panel side rail. DO NOT USE FOAM TAPE.

Step 3 – Remove protective film from the edge of the closure strip and apply ¾” x ¾” soft foam gasket material.

Step 4 –Mark and cut closure strips to fit around handrail, etc. using tin snips. Closure strips may be bent by hand or with duck bill pliers. Lapstrips to make an air tight seal.

Step 5 – Remove paper from polyethylene double sided tape. This tape is clear. Yours is white.

Step 6 –Compress the soft gasket material to the wall and
apply the closure strip to the double sided tape. This will
hold the closure strip in place and make an air tight seal.

Step 7 – Install screws though the closure strip into the sheet metal strip. DO NOT SCREW INTO THE ALUMINUM. When you remove the closure strips the polyethylene double sided tape will peal off of the aluminum without leaving any residue.

3004 Screw Jack Assembly $6.65

Screw Jack Assembly
Part No. 3004
$6.65

The screw jack assembly fits into the top panel rail or side rails and allows you to apply pressure to GWB ceilings or walls to secure the panel assembly inplace.

3005 Digital Differential Pressure Gauge Kit $275.00

Our gauge kit includes 6 feet of vinyl tubing and a bracket that easily mounts to the interior or exterior of any panel.

DigiMag® differential digital pressure gauge, range 0-0.25" w.c.

Product Number: 3005

Price: $275.00

3006 Pushbutton Combination Lockset $200.00

The picture above shows the outside face of our door panel. The door can be ordered with a RH or LH swing.

Our typical door panel consists of a 44" door mounted in a 48" frame. We also make a 48" door mounted in a 52" frame; and a 32" door mounted in a 36" frame. The door has a polyethylene continuous hinge which provides smooth quiet operation while forming an air tight seal. The strike side and top of the door have a 1" x 1" angle mounted to them with a gasket adhered to it to form a seal with the frame. The bottom of the door has a gasketed sweep to prevent dust and debris from escaping the enclosure.

The picture above is showing the inside face of our door panel with Opal polycarbonate.
This has become very popular. Our door panel is 48" wide by 7'-8" tall and adjusts to 10'-0". We provide an adjustable hydraulic closer and a self latching, locking handle, keyed outside, thumbturn inside.
1/4" x 2" solid aluminum threshold strip with neoprene gasket material seal to the floor.

Opal - P/N 4003 - $995.00

Transparent - P/N 4003T - $995.00 

Clear - P/N 4003C - $1035.00

We also offer a pushbutton lock for an additional $200. This lock can be set to any 4 digit combination and is easily reset from storeroom to classroom function. This particular lockset also allows for a keyed entry.

4011 Panel Transport Cart $275.00

Panel Transport Cart

​Product Number: 4011

Price: $275.00

Our Panel Transport Carts can hold up to ten 48" panels at a time. They come equipped with adjustable straps with quick release buckles for easy adjustments.

A removable stabilizer bar allows for easy breakdown; Simply unscrew the rubber knobs and slide out the stabilizer bar.

Two sliding lower strap brackets adjusts to the number of panels for a snug fit.

Tough castors with rubber wheels provide a smooth quite ride. Two castors on the back of the cart have locking brakes.

Cart Dimensions:

2' X 10" Wide

4' X 7" Tall

2' X 8" Long

4012 Hinged Outside Corner $245.00

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

5000 NITRO 600 Air Filtration Machine $995.00

OmniAire 600N
HEPA Air Filtration Machine

The OmniAire OA600N is a portable HEPA air filtration machine with an impact resistant
polyethylene, stackable housing. The high suction pressure maintains the airflow even
with loaded filters, extends the lifespan of the HEPA filter and provides the reliable
performance you have come to expect from OmniAire equipment. The NITRO 600 is UL/
CSA listed for your safety.

OmniAire 600N Specifications

Airflow Ratings(cfm)*........................................200 to 600

Operating Speeds …………..……....Variable speed control

Filtration Stages ………….…….HEPA Filter 99.97%, 0.3µs
..………...MERV8 primary/secondary filter
Optional ..….OdorGuard 600 activated carbon filter
……….. MERV14 GEO95 Filter
Circuit Requirements ….…………...115V/60Hz/5.8 amps
GFI Protected Convenience Outlet ……….…….8.0 amps
Cabinetry ……………….….... Flame retardant polyethylene
10” inlet and outlet rings molded in.
Weight With Filters................................................... 36 lbs.
Dimensions (LxWxH)................................... 25” x 19” x 19”
**Airflows based on blower manufacturer curves. Different
HEPA filters may cause the flow to vary.

ORDERING INFO .................PART #
OmniAire 600N ...............................OA600N
HEPA Filter 99.97%, 0.3µ...............OAH15156P
Geo95 MERV 14 filter .....................OAG15154
Primary/Secondary Filter (qty 20) ...OAP1616
Quick Clamp, 10” dia. .....................QCW12
Flexible Duct, 10” x 25’ ..................OAD10
OdorGuard 600 Carbon Filter .........OG1616

CONFORMS TO UL STD 507
CERTIFIED TO CAN/CSA STD
C22.2 NO. 113-M1984

5002 Omniaire MF100 Mini Force $1150.00

MiniForce II
HEPA Air Filtration Machine
MiniForce II is a compact, portable HEPA air scrubber for small projects and restricted spaces. The MiniForce II is used as negative air machine for removal of toxic mold, asbestos and lead dust during renovation and abatement projects. For removal of chemical fumes, VOCs and biological contaminants, activated carbon filters can be installed.

The MiniForce II provides cleaner and healthier environment at construction/renovation projects and industrial facilities.

MiniForce II Specifications
Airflow Ratings (cfm)*........................................ 350 & 425
Operating Speeds …………..………………….......2 speeds
Filtration Stages ………….…….HEPA Filter 99.97%, 0.3µs
..………...MERV8 primary/secondary filter
Optional ..….OdorGuard 600 activated carbon filter
Motor ………………….………1/5 hp with Thermal Overload
Circuit Requirements ….………..…...115V 60Hz 3.2 amps
Pressure Gauge.................................................. .0-3” W.C.
Cabinetry............Aluminum, silicone sealed before riveting
Exhaust Collar .................................................................8”
Carrying Handles w/Rubber Grips...................................1
3” Hospital Grade Casters.................4 Swivel with Brakes
Weight With Filters................................................... 43 lbs.
Dimensions ....................................... 26.5”L x 14”W x 16”H
*Airflows based on blower manufacturer curves.
Different HEPA filters may cause the flow to vary.

ORDERING INFO................. PART #
OmniAire MiniForce II .....................MF100C
HEPA Filter 99.97%, 0.3µ ...............MFH12
Primary/Secondary Filter (qty 20) ...MFP1313
Intake Manifold, 8”...........................MFIM8
Quick Clamp, 8 to 10” .....................QCW12
Flexible Duct, 8” x 25’.....................MD8
OdorGuard 600 Carbon Filter .........OG1212

CONFORMS TO UL STD 507
CERTIFIED TO CAN/CSA STD
C22.2 NO. 113-M1984

5003 HEPA Filter, 99.99% @0.3 micron,Tested/Certified 16"x16"x6" $225.00

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

5004 Primary/Secondary filter, two-stage poly, 16"x16"1.5", qty20 $73.00

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

ADJUSTABLE PANELS - 7'-8" - 10'-0"

PRINTABLE CATALOGS AND INFORMATION building construction - general contractors and operative builders